What information is needed from a customer before starting work on their part? 

• Print 

• Starting thickness including flatness if available 

• Estimated annual volume and release quantities 

• Special packaging requirements 
• Target pricing is always helpful 

How do you determine which grinding or finishing processes are best suited for a particular part or material? 

• Size of part

• Geometry (shape of the part) 

• Surface finish and flatness required 

• Volume 

2. Surface Grinding Process 

What is the initial surface grinding phase?

• All parts go through a receiving inspection process to verify the incoming part meets the requirements for the process that has been specified 

How does grinding differ for ferrous, non-ferrous, powder metal, or plastic components? 

• Primary difference is wheel selection and method of fixturing 
• Occasionally a special coolant will be required 

3. Heat Treating 

At What Stage is Heat Treating Important for Certain Parts

• Heat Treating can induce some distortion; parts typically need to be heat treated prior to the final grinding process 
• In cases where a lot of stock needs to be removed, we may recommend removing the majority of the material prior to heat treat to improve throughput and reduce cost 

4. Secondary Grinding & Microfinishing 

After heat treating, when and why would a part be returned for another round of grinding or lapping? 

• To achieve the best dimensional capability and finish, grinding or lapping should be the final process whenever possible

5. Coating and Surface Treatments 

What types of coatings or surface treatments are most common for parts after grinding and lapping? 

• After lapping or grinding is complete, parts are rinsed and rust preventative applied if required

How does the coating process impact part precision and surface flatness? 

• Parts requiring a high performance, precision layer of wear resistant surface treatment such as chrome or hard chrome require a final lap after the coating has been applied
• This is very common in  firearms, pump seals and aerospace applications

6. Ancillary and Quality Assurance Services 

What ancillary services (e.g., tumbling, de-burring, light band measuring) are typically required for precision-ground parts? 

• We offer all of the above and will adjust based on customer requirements 
• Some inspections, such as light band inspection are difficult for our customers to reproduce due to the expense of the equipment. In those cases, we produce digital documentation of the inspection that can be shared with the customer

How do you ensure every part meets both customer requirements and ASG’s standards for quality? 

• All products receive a final inspection

What’s your process for documenting and verifying achieved tolerances? 

• Inspection results are documented and maintained based on specific customer requirements

7. Challenges & Expertise 

What are common challenges in maintaining surface flatness throughout all these processes? 

• Working with the customer to provide us with parts that are as flat as possible is the most important aspect. 
• If the inbound part is “out of flat” we may not be able to meet the required flatness and parallelism that is required. Often times we assist customers in measuring these features and in some cases collaborate to improve their internal processes. 

How does your team collaborate with customers to resolve potential issues or last-minute changes in requirements? 

• We pride ourselves on being flexible; we will do everything we can to help our customers succeed. It’s not uncommon for us to improve the overall process and offer our customers a price reduction

8. Customer Communication & Satisfaction 

How did your process expertise solve a significant customer problem with a project?

• ASG asks for samples prior to committing to a project – a lot of companies do not do that. This can save the customer considerable time and money. 
• Exceptional quality 

The post Achieving Surface Flatness Success: The High Precision Grinding Process appeared first on Alternative Surface Grinding.

What is Flat Lapping?

Flat lapping is a precision surface finishing process that uses a lapping plate (usually made of cast iron or other suitable material) and a lapping compound (an abrasive slurry) to remove material from a workpiece. The workpiece is placed in contact with the rotating lapping plate, and the abrasive slurry is introduced between the plate and the part. The combination of the abrasive particles and the relative motion between the plate and the workpiece results in a controlled material removal, producing a flat, smooth surface.

Other Names for Flat Lapping

The terms used for flat lapping can sometimes be confusing because different industries or companies may use different terminology. Here are some of the terms that are often used interchangeably with flat lapping:

• Lapping: This is the most general term and often implies flat lapping unless otherwise specified.
• Precision Lapping: This emphasizes the high degree of accuracy and surface finish that can be achieved.
• Surface Lapping: This highlights that the process is specifically for finishing surfaces.
• Flat Finishing: This is a more descriptive term, focusing on the flatness achieved.

Flat Lapping vs. Hyprolapping

Hyprolapping is a specialized type of flat lapping. Hyprolapping is distinguished by its ability to achieve even tighter tolerances and superior surface finishes utilizing fine grit wheels spinning in orbital motion.

Here’s a table summarizing the key differences:

Alternative Surface Grinding (ASG) specializes in precision surface finishing services, including hyprolapping. ASG offers expertise in achieving tight tolerances and the absolute best possible flatness and surface finish. 

Both flat lapping and hyprolapping are ideal for components requiring: 

• Sealing surfaces
• Precise mating surfaces
• Bearing surfaces

Contact Alternative Surface Grinding when your parts call for tighter tolerances and superior surface finishes for the most demanding applications.  

The post Flat Lapping: Achieving Ultimate Surface Flatness and Finish appeared first on Alternative Surface Grinding.

Light Band Measuring is a precise optical method used to measure the flatness of surfaces. It involves using a monochromatic light source and an optical flat to create interference patterns, which reveal minute variations in surface flatness.

Why is Light Band Measuring important?

Light Band Measuring is crucial for industries requiring extremely flat surfaces. It ensures components meet strict flatness tolerances, which is essential for proper functioning in high-precision applications such as aerospace, semiconductor manufacturing, and optical systems.

What types of parts typically require Light Band Measuring?

The method is typically used for:

• Precision gauge blocks
• Hydraulic Pumper
• Aerospace
• Sealing Surfaces
• Precision mechanical components

What is the typical flatness tolerance achieved?

Light Band Measuring can detect surface variations as small as a fraction of a wavelength of light, typically achieving flatness tolerances in the range of 0.5 to 2 light bands (approximately 0.00001 to 0.00004 inches).

How does Light Band Measuring compare to other flatness measurement methods?

It offers several advantages over other methods:

• Higher precision than mechanical methods
• Non-contact measurement, preventing surface damage
• Ability to measure entire surfaces quickly
• Visual representation of flatness variations
• Only method for 5 light bands or better

What equipment is used?

The primary equipment includes:

• Monochromatic light source (usually helium-neon laser)
• Optical flat (reference surface)
• Viewing screen or digital camera for capturing interference patterns

How long does the Light Band Measuring process take?

The actual measurement process is relatively quick, often taking only a few minutes. However, setup time, process refinement, and analysis may extend the total process to 30 minutes to an hour, depending on the part’s size and complexity.

Can Light Band Measuring be performed on-site, or does it require specialized facilities?

While Light Band Measuring can be performed on-site with portable equipment, it’s often conducted in specialized facilities, like Alternative Surface Grinding, to ensure optimal environmental conditions (temperature control, vibration isolation) for the most accurate results.

What information do I need to provide when requesting a quote?

When requesting a quote, provide:

• Part dimensions and material
• Required flatness tolerance
• Surface finish specifications
• Quantity of parts to be measured
• Any specific industry standards to be met
• Required documentation

Is Light Band Measuring suitable for all materials?

Light Band Measuring is suitable for most materials with reflective surfaces. However, it works best on:

• Metals
• Polished ceramics
• Glass
• Certain plastics with smooth surfaces

How does the surface finish of a part affect Light Band Measuring?

A smooth, reflective surface finish is ideal for Light Band Measuring. Rough or matte surfaces may scatter light and reduce measurement accuracy. Generally, a surface finish of 32 microinches or better is recommended for optimal results.

What’s the difference between Light Band Measuring and Light Band Flatness?

Light Band Measuring and Light Band Flatness are interchangeable terms referring to the same process. Other common names include:

• Optical flatness testing
• Interferometric flatness measurement
• Monochromatic light inspection

Can Light Band Measuring be used for curved surfaces?

No

What are common industries?

Industries that frequently use Light Band Measuring include:

• Aerospace and defense
• Semiconductor manufacturing
• Mechanical seals
• Optics and photonics
• Precision machining
• Metrology and calibration services
• Scientific research institutions

The post LIGHT BAND MEASURING FAQ appeared first on Alternative Surface Grinding.

The Challenges of In-House Precision Lapping 

Setting up a precision lapping operation involves more than simply purchasing equipment. Here are some of the key challenges: 

1. High Initial Investment 

• Equipment Costs: Precision lapping machines, especially advanced models with automated features, require substantial capital investment. For small to medium-sized enterprises (SMEs), this expense can be a significant barrier to entry. 

• Setup Costs: Beyond purchasing the equipment, companies must account for the cost of installation, calibration, and any necessary modifications to their facilities. 

2. Specialized Expertise 

• Training Requirements: Operating lapping machines demands specialized knowledge of materials, abrasives, and process parameters. Developing this expertise internally requires significant time and resources. 

• Process Optimization: Achieving consistent results involves fine-tuning numerous variables, such as abrasive type, pressure, and speed. Without prior experience, this can lead to inefficiencies and suboptimal outcomes. 

3. Maintenance and Downtime 

• Regular Maintenance Needs: Lapping machines require frequent maintenance to ensure precision and avoid performance degradation. Consumables like abrasive cutting oils also add recurring costs. 

• Downtime Risks: Unscheduled downtime due to equipment failure or improper maintenance can disrupt production schedules and increase costs. 

5. Scalability Challenges 

• Production Volume Constraints: For large-scale production runs, in-house lapping may struggle to meet demand efficiently without significant additional investment in equipment and labor. 

• Material-Specific Challenges: Certain materials, such as brittle or chemically reactive ones, require tailored processes that may not be feasible without extensive experience and resources. 

The Advantages of Outsourcing to a Precision Lapping Service 

Engaging a precision lapping service provider offers several distinct advantages: 

Reduced Capital Expenditure: Eliminate the need for significant upfront investment in equipment. 

• Access to Expertise: Benefit from the knowledge and experience of skilled technicians who specialize in precision lapping. ASG’s team, for example, has a deep understanding of lapping various materials to achieve demanding specifications. 

• Cost Predictability: Gain better control over costs with predictable per-part pricing, avoiding unexpected expenses related to equipment maintenance or process development. 

• Focus on Core Competencies: Free up internal resources to concentrate on your core manufacturing activities, improving overall efficiency and productivity. 

• Faster Turnaround Times: Experienced service providers can often deliver faster turnaround times due to their specialized equipment and streamlined processes. 

• Access to a Range of Capabilities: ASG, for instance, offers double-sided lapping, grinding, and other ancillary services like deburring, heat treating, and surface coating, providing a comprehensive solution for your microfinishing needs. 

• Guaranteed Quality: Reputable lapping services are committed to quality and accuracy, ensuring that your parts meet the most stringent requirements. ASG is known for its intense commitment to quality and meticulous approach. Tolerances down to .0002 are achievable. 

Making the Right Choice 

When deciding whether to invest in in-house lapping capabilities or outsource to a service provider, carefully consider the factors mentioned above. For many manufacturers, the cost savings, access to expertise, and improved efficiency make outsourcing the more logical and profitable choice. 

Contact Alternative Surface Grinding today to discuss your precision lapping needs and discover how we can help you achieve superior surface finishes and tight tolerances without the overhead costs of in-house operations. 

The post Why Outsource Precision Lapping? A Cost-Effective Alternative to In-House Operations appeared first on Alternative Surface Grinding.

Workpiece Material 

The properties of your chosen material significantly impact the grinding process. Overall, harder materials result in better surface finishes and allow for tighter tolerances.   

Grinding harder materials tends to generate more heat, but experienced shops like Alternative Surface Grinding know how to manage these issues to avoid any thermal damage. Materials with poor thermal conductivity may result in increased surface roughness.  

Starting Part Thickness 

Parts with significant thickness variations require more material removal to achieve a uniform surface, leading to longer grinding times. Achieving tight tolerances becomes more difficult with varying thicknesses, as the surface grinding process must account for these differences while maintaining precision. Multiple grinding passes may be necessary, with progressively finer abrasives and smaller depth of cuts.  

Surface Finish Requirements 

Your desired surface finish dictates many process parameters, like the methods used and measurement procedures.  

When tighter tolerances are specified for a part, the surface grinding process is generally more time consuming, and could require the close-tolerance measurement accuracy of light band technology. 

By considering these factors when submitting your surface grinding or hyprolapping project, our team can deliver results that meet your specific needs and expectations. re.  

The post Factors that Affect Surface Grinding and Lapping Results appeared first on Alternative Surface Grinding.

Why Fineblanked Parts Need Additional Finishing 

• Improved Surface Quality
  Fineblanking produces parts with smoother surfaces compared to traditional stamping, but some applications require even finer surface finishes. Surface grinding can achieve tighter tolerances and superior flatness that fineblanking alone cannot provide. 
• Enhanced Dimensional Accuracy 
  While fineblanking offers good dimensional control, certain industries demand even higher precision. Surface grinding can refine part dimensions to meet exacting specifications, especially for components used in aerospace, automotive, or medical devices. 
• Stress Relief 
  The fineblanking process can introduce internal stresses in the metal. Surface grinding helps to relieve these stresses, ensuring better part stability and longevity. 
• Burr Removal 
  Although fineblanking significantly reduces burrs compared to conventional stamping, some applications require completely burr-free surfaces. Precision grinding can eliminate any remaining burrs or imperfections. 

Benefits of Partnering with a Specialized Surface Grinding Service 

• Expertise and Specialized Equipment 
  Companies like Alternative Surface Grinding possess deep expertise in precision finishing techniques such as double disc grinding and hyprolapping. This specialized knowledge, combined with advanced equipment, ensures optimal results for even the most demanding applications. 
• Cost-Effectiveness 
  Outsourcing to a dedicated surface grinding service can be more cost-effective than maintaining in-house capabilities, especially for businesses with varying production volumes or diverse finishing requirements. 
• Quality Assurance 
  Specialized service providers typically have robust quality control processes in place, ensuring consistent, high-quality results that meet or exceed industry standards. 
• Flexibility and Scalability 
  Partnering with a surface grinding specialist offers flexibility to handle different materials, part sizes, and finishing requirements. It also allows for easy scalability to meet fluctuating production demands. 
• Focus on Core Competencies 
  By outsourcing surface grinding, fineblanking manufacturers can focus on their core competencies, improving overall efficiency and productivity. 

While fineblanking produces high-quality parts, partnering with a specialized precision surface grinding service like Alternative Surface Grinding can elevate part quality to meet the most stringent requirements across various industries. Contact us to learn more.  

The post Precision Surface Grinding in Fineblanking appeared first on Alternative Surface Grinding.

ASG: A cut above other finishers    

Alternative Surface Grinding (ASG) is recognized as one of the leading companies offering precision grinding in Cleveland OH. With nearly 60 years of experience in the precision grinding field, ASG provides a wide array of grinding services. 

• Double disc grinding: ASG offers both horizontal and vertical spindle grinders capable of grinding two parallel surfaces in one operation with tolerances as close as .0006 of an inch. ASG can process virtually any material via these machines, including ferrous and non-ferrous metals, plastics, composites, and even rubber parts.  

• Hyprolapping: For maximum surface smoothness, hyprolapping delivers excellent tolerance compliance. ASG offers both single and double-sided lapping, with tolerances to .0002 on an inch.  

• Light band microfinishing: ASG is also highly skilled at light band microfinishing, which combines light band flatness measurement with microfinishing to deliver very high levels of surface flatness on a part surface.  

In addition, ASG offers tumbling and double-face grinding services. It also provides superior superfinishing capabilities. Utilizing a rotating workpiece finished with a moderately soft polishing stone, it is commonly employed on steel parts, but also works with more exotic materials like ceramics, plastics, or titanium. Superfinishing increases part life, reduces wear, achieves tighter tolerances, strengthens load-bearing surfaces, improves sealing performance, and eliminates machine break-in periods. 

From small volumes to millions, ASG delivers!  

From small parts to large and from a few hundred parts to up to a million units, ASG can handle your order and deliver high-quality, perfectly machined finished products when you need them. To learn more about ASG’s capabilities in precision grinding in Cleveland OH, call (330) 273-3443 or contact us. If you’re further along on your project, request a quote.

The post Precision Grinding in Cleveland OH appeared first on Alternative Surface Grinding.

No heat; no thermal damage!  

Utilizing a rotating workpiece finished with a moderately soft polishing stone, it is commonly employed on steel parts, but also works with more exotic materials like ceramics, plastics, or titanium. Since it doesn’t heat the workpiece, it can remove heat-damaged surfaces caused by prior grinding and lathe turning operations, thus enhancing component life; it’s one reason today’s auto engines last so much longer than those in the past.    

Alternative Surface Grinding (ASG) offers superior superfinishing services integrated with our microfinishing capabilities that include double disc grinding, hyprolapping and light band microfinishing. 

ASG is the tight tolerance king  

We specialize in microfinishing small parts to extremely tight tolerances. Our double-disc grinding capabilities, offered on both horizontal and vertical spindle grinders, can hold tolerances as tight as 0.0006” and flatness within 0.0003.” We can handle volumes ranging from 250 to a million pieces or more. Likewise, our hyprolapping technology, which can grind two sides of a flat part simultaneously, is ideal for processing thin parts without deforming them. Hyprolapping can hold tolerances of 0.0002” and flatness within 0.00005”. 

ASG has experience working with a broad array of sectors and industries, including aerospace, agricultural equipment, automotive, and transportation. In addition to precision grinding and finishing, our capabilities include de-burring, tumbling, heat-treating, shot-peening, surface coating and non-destructive testing.  

To learn more about superfinishing services and how ASG can help you with all your microfinishing needs, call (330) 273-3443 or contact us via our website. If you’re further along on your project, request a quote.  

The post Superfinishing Services appeared first on Alternative Surface Grinding.